Welcome to wchemv
|
WEIFANG TIANFANGSHENGHONG CHEMICAL CO.,LTD
WEIFANG TIANFANGSHENGHONG CHEMICAL CO.,LTD
Sign in or Join Free Now!

Contact Us

Street Address
19 Liuxian Street, Dawa Street, Weifang Binhai Development Zone
Country/Region
China/Shandong
Telephone

86-0536-5305998

Sell like hot cakes High quality MB330 reverse osmosis membrane system fungicide
Sell like hot cakes High quality MB330 reverse osmosis membrane system fungicide
  • 1 - 1000  Kilogram US $2.11
  • >= 1000  Kilogram US $0.99
Supply Ability:
20000 Kilogram/Kilograms per 0
Port:
qingdaogang
Email:
Quantity:
Kilogram
 Message:
  • Product Details
  • Company Profile
Quick Details
Place of Origin:
China
Brand Name:
Model Number:
MB330
Packaging & Delivery
Product Description


杀菌剂1-1.jpg

Product characteristics

1, ZH-100 Reverse Osmosis Chemical Membrane Antiscalant ATMP is of high efficiency to increase the water production and  quality ,reduce the operation  expenditure  and can be used to prevent the scale accumulation on membrane of reverse osmosis system ,nanoflitration membrane system and ultrafiltration membrane system ;

2, This product can effectively control the inorganics scale formation while in a wide range of concentration .The highest LSI rate in no acid situation is 2 .8;

3, It doesn't  form any insoluble materials with the oxide of aluminium and ferri ,and cilicon chemicials ;

4, It is especially useful for controlling ferri ,aluminium and heavy metal polluted materials ,and the concentration of  ferri is allowed to reach the highest level 8.0mg/L in supplying water ;

5, It can effectively inhibite the polymerization and precipitation of cilicon ,the concentration of SiO2 is allowed to reach the highest level 290mg/L in concentrated water area;

6, It can be used for reverse osmosis system (CA)and TFC membrane ,nanofiltration membrane and ultrafiltration membrane ;

7, Its solubility and stability is excellent ;

8, The PH level of supplying water between 5-10 is effective .


Dosage

1. The dosage of membrane system for industrial water treatment is 10-50 ppm for on-line operation and 50-170 ppm for off-line operation.

2. The amount of drug used depends on the severity of biological contamination. The active ingredients of 10-30 ppm were added for 30 min-3 h every 5 days with mild degree. When biological contamination was confirmed, 30 ppm was recommended for 3 consecutive hours.

3. When serious biological pollution has been eliminated, continuous dosage should be adopted. It is suggested that continuous dosage of active ingredients should be 0.5-1.0 ppm. The dosage can be adjusted according to the level of biological activity.

4. In other cases, please contact our technicians and make reasonable arrangements according to the specific conditions.

 

Usage

3.1 During the operation, the influent water is continuously added through the metering pump, and the added amount is 400 mg/L; Add 1 time for about 2 weeks, 30 minutes each time. This method uninterrupted the production of desalinated water, but the dosage is large. 3.2 Stop the operation of the RO system, configure the sterilization solution by chemical cleaning, and recycle the liquid to process the system. If the system is seriously polluted, the system should be sterilized in situ after the local chemical cleaning: 1) Add water to the cleaning tank to prepare a special antibacterial agent for reverse osmosis, the concentration is 400-800mg/L; 2) Adjust the pH of the cleaning solution below 7 (using citric acid or hydrochloric acid, the purpose is to extend the life of the membrane; 3) Cycle for 45 minutes.

Packaging Storage

1. Safety: This product should avoid direct contact with eyes and skin. Once contacted, rinse immediately with plenty of clean water.

2. Packaging: 20kg, 25kg and 200kg, 250kg plastic barrels, or according to user requirements.

3. Storage: Keep in a cool and dry place indoors for 10 months.

图片2.png


Safety, packaging and storage

safety: avoid direct contact with eyes and skin.Once in contact, rinse immediately with plenty of water without delay.Manual operation should be equipped with protective glasses and acid gloves.

packaging: 20kg, 25kg and 200kg, 250kg plastic drums, or as required.

storage: store at room temperature and out of light.



 

Our Company

Weifang TianFangShengHong Chemical Company located in Binhai Economic Development Zone, convenient transportation and favorable geographical position.

Our company is a scientific research and development to manufacturing paper-making chemicals, pharmaceutical intermediates production of technology-based enter-prises. The company has a large number of professional and technical personnel , and technical forces of a strong, timely adjustment of the industrial structure. and from do-mestic, larger than all the varieties produced this series products manufacturers. Prod-ucts in the industry with a leading position , many of these varieties fill the gaps in the homeland.

Company to a “people-oriented, integrity and pragmatic” business philosophy, the clients as God and dedicated service to users. Companies with advanced production equipment, superb manufacturing process, strong technical force, complete detection means, improve the quality assurance system and excellent technical support to make our products and services effective and reliable quality assurance.

Company will continue through the management of innovation and technological progress to quality products, attentive service, the integrity of the operation, and the majority of my colleagues go hand in hand to create-nevermind!

图片3.png图片4.png图片5.png

 

FAQ

Q :Are you trading company or manufacturer ?

A:We are trading company but we own one production plant and we own some production lines in our cooperated factory and we have our own technology of making products.

 Q: What is the MOQ?

A: There is no limit, according to your requirements.

 Q: Is this price your real price??

A6:Yes, but the price is floating, I suggest you contact us before you place an order. 

 Q: How can I place order?

A: You can contact us by email about your order details, or place order online.

 Q: How can I pay for you?

A: After you confirm our PI, we will request you to pay. L/C or T/T is the most usual ways we are using.


Send your message to this manufacturer
Email:
Message:
Your message must be between 20-8000 characters